STATE ENTERPRISE “SPECIAL DESIGN & TECHNOLOGY BUREAU
OF THE G.S.PISARENKO INSTITUTE FOR PROBLEMS OF STRENGTH
OF THE NATIONAL ACADEMY OF SCIENCES OF UKRAINE”
(SE “SD&TB IPS NASU”)

2 Timiryazevskaya str., Kiev, 01014, Ukraine,
ph./fax +38-044-2850855, 2858481, E-mail: sdtb@ips.kiev.ua

 

MAIN


TESTING MACHINES

The machine for testing of biomaterials BMT-20
  • Application – strength tests of biomaterials;
  • Test types - tension, bending, compression;
  • Test conditions - room temperature, air environment.

Design features
  • Complete set of the specialized accessory for realization of tension, bending, and compression tests of biomaterials;
  • Precision encoder sensors for measurements of  loading rod displacement and sample deformation;
  • Control of the machine with the manual console or by software in fully automatic mode.

Main technical data:
  • Maximum test load - 20 kN;
  • Error of load measurements - no more 1 %;
  • Measurement range of sample deformation ± 15 mm;
  • Resolution of measurements of specimen deformation - 2 µm;
  • Resolution of measurements of cross-head displacement – 0.6 µm;
  • Total loading rod displacement – 90 mm;
  • Loading rod displacement rate - from 0.15 up to 150 mm/min;
  • Overall dimension 1380*980*600 mm.

 

 

Software

The program BiomaTest provides realization of tension, bending and compression tests of samples of biological materials in completely automated mode and carries out such functions:

·        Performance of prior operations, parameters input, test conditions settings  in strict sequence which excludes operator mistakes or reduces them to a minimum;

  • Performance of measurements and control of the testing machine under either compression or tensile load;
  • Auto-setting of  the initial force contact (force closure) with a sample;
  • Automatic termination of sample testing by specified criterion;
  • Protection of the measuring sensors and the machine of mechanical overload;
  • Graphic representation of the load-deformation diagrams during test with auto-scaling in real time;
  • Preview and saving the test results and test parameters;
  • Printing of the load-deformation diagrams.